eVogue GPS Tracking Phone (GPS Traker)

The product introduction:

GPS Tracker Product Brief Specification

1. System Application Mode

GPS Tracker System includes:

· GPS Tracker Phone: receives GPS satellites signals and communicate with location service system or GPS smart phone thru GSM (900/1800Mhz or 850/1900Mhz) SMS channel

· Cell Center: communicate with multi GPS tracker phone thru GSM networks to fulfill map view and monitor functions etc.

The application mode is shown as below Fig 1:

Fig 1. GPS Tracker System Application Mode

2. GPS Tracker Phone Hardware Features

· GSM 900/1800Mhz or 850/1900Mhz

· 20 channels uNAV GPS module

· Embedded GSM antenna

· Embedded GPS patch antenna

· High sensitive micro phone

· Standard cell phone keypads

· Independent redefined alarm keys and SOS key

· 128x32 PSTN display

The product outline is shown as below figure 2.

Fig 2. GPS Tracker Phone Product Outline

3. GPS Tracker Phone Functions

3.1. Phone functions

Supports standard cell phone functions

3.2. GPS position Single Report Back

The handset sends the Longitude and Latitude position through SMS.

3.3. GPS position multiple Report Back

The handset sends the Longitude and Latitude position through SMS.

3.4. GPS Alarm Clock function.

User can enter 8 alarm time setting into the handset. When the alarm time is due, the handset will

automatically send a SMS with GPS position to the Call center and the Guardian number.

Note: Before setting the alarm clock function, set first the current time into the handset using the STI

command. This is to ensure that the handset will activate the alarm clock and send out the GPS

position on time.

The handset sends the Longitude and Latitude position through SMS.

3.5. GEOFENCE function (Optional)

User can setup a “Geofence” range to help maintain a safety distance between the handset user from a

GPS Tracker Product Brief Specification

reference point of origin. Once the Handset user steps away from the perimeter, a SMS with GPS

location data will be automatically sent to the Guardian and Call center.

To Turn on, press GEOFENCE key, or use SMS message to turn on the GEOFENCE function.

To Turn off, use SMS message to turn off this function, or it will turn off if there is any overstepping

alarm.

The default Geofence radius setting is 200 meters, but it can be set from the range of 200~9999 meters

using SMS message.

Setting Geofence from a remote: Set the center Longitude and Latitude, and a radius reference by

SMS.

Setting Geofence from the handset: Press and hold the GEOFENCE key. The LED light indicator

will show if the reference center position is set successfully. And then the GEOFENCE function

will automatically turn on.

3.6. One-way Monitor

Users can send format message to command the handset to dial an appointed phone number. Once the

appointed phone user accepts the call, he can listen to the surrounding of the handset. The handset user

will not be alerted, as there will be no indication for the call.

3.7. SOS function

The handset stores 5 SOS phone numbers, Guardian, and Call center numbers in memory. When any

emergency situation comes, press and hold OK button to send SOS SMS with GPS data to call center

and guardian numbers to give an alert. At the same setting, the handset will dial the Guardian number.

The guardian can listen to the surrounding sound of the handset.

3.8. Restricted Command senders

The handset can restrict the SMS command senders. It can store up to 10 restricted phone numbers in

memory. When the number/s are set, the handset will process only the SMS command coming from

any of the stored restricted sender/s